hello to all the forum I have a problem on a toyota yaris, petrol, 2005 with the control unit bosch, basically, the customer has lost the keys to using the car prog I managed to discover that practically enough to do a reading of the 95080 of the engine control unit, after that, it should be possible to program the new transponder. Then I am prepared to buy two new trasonder type JMA TPX1 glass as suggested by the soft of zed when caricavo the dump of the ecu of the engine, proceed with the programming of the trasonder that goes to a good end, and that when I try to re-read to me from the data, but when mo put it around the antenna I start the machine the two questions at this point, I have to do I have the wrong type of transponder, what I can, once written to the transponder and is made or can be re-programmed?, tomorrow I am attaching the dump of the ecu the engine.
of course there is no way to make total sense not I would proceed in this direction,thanks for any answers