the control unit alfa 2.4 jtd 20v sprogrammata

[alfetta80]

guys I ask you experts, is it possible that by partially bonding a pin to the ecu sprogrammi??
then the pin is sfiammato from then on, when you turn the picture the light the mil flashes strong, taking the relay of the glow plugs, and more.
I say sprogrammata for that' if I try to connect another ecu defect that was not done,if instead we write the bachup is the same defect, but com is something like that possible??

[cinqueturbo]

Ufff!!! trouble ahead... open it from both sides and check with a lot of attention for sure and skipped a track or some component...

[munro]

I cinqueturbo...
unfortunately I know that if sprogrammata from what you are saying, I know that it is just burned....
open it as you said cinqueturbo and check it out for good..

[alfetta80]

hello guys then:the open and the slopes burned even the shadow,I set out on my search, and I find an ecu used the same number perfect the I open I make bachup but not good, same defect.eye this thing if I connect the ecu without scodificarla the defect does not but, obviously, not part of it. I repeat the problem: just turn the picture starts to blink the indicator light mil with strange runori type relay and will not start.thanks

[ugoboss]

very likely that in the sfiammata has ruined the processire and the backup that you make is corrupted, you have to find a backup with the same numbers do a partial and you should be fine.

[ugoboss]

of course, the backup, put it in another ecu.

[munro]

since you say that may be that it is sfanculato also the body that then in that car is the plate fuses and relays...
but what the hell, and success is car? attacked it, at 24v?

[sportknight]

sorry, but since you say that it is sfiammato a pin check where is that pin

[eobdexpression]

guys I ask you experts, is it possible that by partially bonding a pin to the ecu sprogrammi??
then the pin is sfiammato from then on, when you turn the picture the light the mil flashes strong, taking the relay of the glow plugs, and more.
I say sprogrammata for that' if I try to connect another ecu defect that was not done,if instead we write the bachup is the same defect, but com is something like that possible??

Hello mail up to read out of the ecu that has the problem, the other ecu that you have tried have the same hw and software? Anyway, if you need to try another ecu, you need to have to dorza same codes as on edc16c39 it is not possible to read and write to the counter in bdm the micro but only flash and e2prom anyway, you may be able to do a test to check everything whether it is also a problem due to the sfiammata that I have not figured out how to maybe if you explain better by making a scodifica total on the flash and the e2prom

[ugoboss]

Hello mail up to read out of the ecu that has the problem, the other ecu that you have tried have the same hw and software? Anyway, if you need to try another ecu, you need to have to dorza same codes as on edc16c39 it is not possible to read and write to the counter in bdm the micro but only flash and e2prom anyway, you may be able to do a test to check everything whether it is also a problem due to the sfiammata that I have not figured out how to maybe if you explain better by making a scodifica total on the flash and the e2prom

are you sure of what you are saying? then, according to you, in the edc16c39 of this machine there are the flash and the mpc and the bdm only reads the flash and the e2prom?