Hi to all,
I have prepared a map to study and perhaps for comparison with other expert users and beginners...
If you have any questions or notes are available.
Hi to all,
I have prepared a map to study and perhaps for comparison with other expert users and beginners...
If you have any questions or notes are available.
Hello. I tried to look at the map ori and the mod and according to me (I am a principiantissimo, then get it all with the springs) there are inconsistencies.
For example, you've raised the torque limiter of about 20% and then you are asking for more fuel but then the two maps lambda to the addresses 1CD114 and the next 1CD358 have been increased, for example, to 4000 rpm and > 1000 mg air from 1,377 to 1,515 then ask for a cut in diesel fuel. On the one hand you want to increase and on the other to cut.
if it is, as it says switing is wrong
good evening I gave a look also and I agree, and I agree with the map, the lambda should not be increased otherwise levi diesel you need to decrease .... have a good evening...Originally Written by switing63
You are right, controlling I facts increased the threshold lambda top and bottom instead of decrease it was an error of inattention and negligence for not having double checked the gains made.
Thanks for letting me know.
ps. the torque limiter, however, in my opinion, is not asking for diesel but if it size.
the limiter diesel is a map relief, but like all the other works in symbiosis with the whole.
If too high, "ask" too much fuel, the more of necessary compared to the other maps
You sorry, "you've raised the torque limiter of about 20%" I meant to say that ask to be able to inject more diesel fuel than the original amount, then rightly came to the new threshold cuts.
Quote
