Confirmation maps

[panterargento]

Hi to all, I would have doubts on some of the maps that ecm titanium ranking as "injection, split".
The map in question ? a Bosch EDC16C31 and concerns that of a BMW 320 2.0 150cv E46.
In the screen are highlighted on the maps in question, now from what I understand the above should cover:
the first "injection, split" should be the time of injection
the second "injection, split (Map1) (Boost x RPM)" it should be the map fumes
the third "injection, split (Map2) (Boost x RPM)" should be the advances
Precisely, I would like to know if I got it right, or if they are out of the way.
Thank you in advance.

[egs]

The first ? the diesel main and the other should be as you say...

[biondo83]

Also, according to me, should be so?.

[panterargento]

The first ? the diesel main and the other should be as you say...

But the diesel main should not be "arricch. accelerator"?

Also, according to me, should be so?.

As I say?
Or as it says in egs?

[gezame]

Hello
In the Ecm, and Titanium, for night safe, you need to see the map in 2d (serves experenza), some drivers here ranking comme "injection, split" are "limiters smoke", others are " injection times", etc.
Cuasi all are sbagliatto.

[panterargento]

In fact, I checked in 2D, and seem to me to be as I described, but I'm not sure.

[munro]

the first map that tita called "injection, split" injection time, in fact, in the axes you press the rail up to 1600bar and iq up to 85mm3
the second map, "injection, split (Map1) (Boost x RPM)" ? the map smoke but in the lambda function in the axles you have engine rpm and maf quantity
finally, "injection, split (Map2) (Boost x RPM)" are the advances or maps soi axes have the engine rpm and also here iq up to 75mm3...
just for accuracy the ecu in question ? a edc16c31 as it tells you the tita but a edc16.A0...

[panterargento]

Ok, thanks milked, you have been very clear������

[gezame]

the first map that tita called "injection, split" injection time, in fact, in the axes you press the rail up to 1600bar and iq up to 85mm3
the second map, "injection, split (Map1) (Boost x RPM)" ? the map smoke but in the lambda function in the axles you have engine rpm and maf quantity
finally, "injection, split (Map2) (Boost x RPM)" are the advances or maps soi axes have the engine rpm and also here iq up to 75mm3...
just for accuracy the ecu in question ? a edc16c31 as it tells you the tita but a edc16.A0...

Hello
On the general, but not always "munro", you can generalizare with drivers Alientech.

[panterargento]

the first map that tita called "injection, split" injection time, in fact, in the axes you press the rail up to 1600bar and iq up to 85mm3
the second map, "injection, split (Map1) (Boost x RPM)" ? the map smoke but in the lambda function in the axles you have engine rpm and maf quantity
finally, "injection, split (Map2) (Boost x RPM)" are the advances or maps soi axes have the engine rpm and also here iq up to 75mm3...
just for accuracy the ecu in question ? a edc16c31 as it tells you the tita but a edc16.A0...

ESI for? it tells me that ? a edc16c1