Should I buy a programmatoe flash/eeprom, I would be willing to take UPA 1.3 with corresponding adapters. Okay, or would you recommend some other model??
Should I buy a programmatoe flash/eeprom, I would be willing to take UPA 1.3 with corresponding adapters. Okay, or would you recommend some other model??
Hello as a programmer, I recommend you the willem gq-4x
The UPA ? a very good programmer, but does not read the flash, of any kind... Willem ? a little bit more? full...
the upa does not read those pi? old I could do with programmers much more? old type the top853 that cost a bagatelle
so if I well understood I should take a willem... adapters for flash included.
The Upa would be fine for the eeprom and things of that kind, except the flash.
as I advised you I few posts ago get the willem gq-4x and go quiet, and to do all the unlike other programmersOriginally Written by blackwolf76
Thanks for the advice, go for willem,
but you should take the full pack with all of the adapters or just to take a special someone to separate??
the wilem and the + complete
Not ? that does nothing...the one that reads the law well, and ? reliable both on the micro saddles eeprom,? does not read the flash, that's all...
take upa original does not cost much do micro eeprom and the 29f400 with adapter can work well.then you create cables, and can work well.if you need to make maps etc etc you have to opt for a cock or kess ktag
Write permission
Quote