Hi guys,
as the title suggests I have a problem with the switch off on an Audi A6 3.0 Tdi number SW 1037381388.
After you have made the edit in the usual way, the control unit stores the fault code U0301 "incompatible software" and enter into recovery.
There ? ever happened to you?
I enclose the original
Last edited by msport (exil77grande); 11-07-2013 at 17:53
yes, the single bit switch on some of the 3.0 tdi does not work, do it with the time that it goes well
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
Ok, now I try!
Thanks
us on several 2.7 tdi 3.0 tdi we had to manually intervene.
[IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]
I have seen that on this ecu also cernado bit of switch c'? however, something else that started the regenerations, on the old a4 b7 with ecusafe has not given me any problem.
to do it on a A8 3.0 tdi 1037371075 recommended Times, Ecusafe or through a switch?
Possibly with Ecusafe do I have to delete the DTC?
time and do not have problems
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
MatteoP ...... then you have solved it ? If you like ?
I ? had an Audi A6 3.0 233cv edc16cp34 with the same problem , in fact the worst I think...... car is not mappable by OBD with MPPS original, with fgtech2 etc..... from the error in the phase of initialization write (do not erase nor flash)
Made in the bdm..... by only writing the flash error U0301 exactly like you. For the rest seems to be going well, albeit with a light on. Tried both with bdm cmd 1255 is with KTAG , same problem. Also rewriting the original flash and the problem persists. The only way for you to go away the error U0301 ? to put back in the full backup bdm.
Ideas ??
if putting the file in the flash gold gives you the same error must be a problem of cks, or rsa, the controls, the cks when you have finished writing.
ugo ---- president A.E.P.
yes, I thought the same thing, with the KTAG does it automatically, while with the BDM 1255 c'? the possibility? to redo the checksum to the end of the write of the flash (which anyway is done automatically when you upload the file in the software)..... you've tried, but nothing, same problem.
I forgot, we have also tried to fix it via software (winols) before doing this write. .............. the outcome is always the same !!! and what the hell !!!
Last edited by leandro89; 12-02-2014 to 21:58
Write permission
Quote