write trucks with galletto v53

[alien78]

hello all I would like to know if anyone has ever tried to write a scania r with ems s7
I read without problems, but I am afraid that I will write lock since you can't? do bdm...................

[davidehfnos]

hello you have connected the v53 clone to 24 v???? the read it all correctly??? according to me as he read the writing

[alien78]

I used the v53 clone the one with the pc and reading ? was made correctly

[sisco]

hello alien 78 also I read a s7 of a scania but with the version 84 of cock 2 (clone)? I have not tried yet to write, in fact if you do know how to v

[Mr.Flash]

I always knew that the rooster clone were limited to 12v..... for? in fact, I have never personally tried it. You have also done the writing ???

[alien78]

no, I have not yet tried to write why? the first truck that me ? happened to you ? a scania and in the case of a block in the process of writing that you can't? do bdm........
but the galletto clone works great 24v

[sisco]

I have read several ecu 24 volt and I have written 3 ms 6.2) and (2 s6 bdm always a24 volt

[davidehfnos]

with the cock, v53?

[nox]

I have read several scania and also iveco cursor with the ms6.2 masi serial've always had problems with edc7 that I have to try in Bdm, However, on 24 volt works I have both the v48 53 but I know that in the round there were of v48 who did not have the rel? 24

[alien78]

so here today I wanted to write the scania r360 but when I open the software of the cock I have seen that is not seen pi? the list of trucks,tractors, and motorcycles for the rest everything works perfectly.
? ever happened to qualcuno??????????