silicone to seal the ecu

[nero72]

Hi guys, can I know how do you replace the ecu after it opened, what to put on to seal the cover. Greetings, Gianfranco.

[sportknight]

I put the sealant black to engine gaskets,resistant to high temperatures

[nero72]

The cleans before closing

[carlo abarth]

the grey dellaloctite and the same as the coloring !!!

[r6raven2010]

I use silicone gasket wurth grey... great

[nero72]

But the black one to close the cylinder heads and black, and good, and then reopen it later it will be? pi? simple , or am I wrong

[infinityecu]

But the black one to close the cylinder heads and black, and good, and then reopen it later it will be? pi? simple , or am I wrong

Use the black or grey both are both great

[V.V.]

I recommend the simple butyl glue, for indenrci the one that is used on the inside of the door panels to secure the sheet of polionda or similar to the frame of the door. The island from damp, never hardens, cut off with little force and without the aid of special tools (can you? also, do not heat) IMHO. I have sealed an aquarium containing oil dialettrico with a PC running set (experiments of Sunday) and has held three years before the smontassi !

[spatullo]

I put the "black pasta", in short, the silicone gasket high temperature for the motor. It seals perfectly, but I have never tried to re-open a unit to find out if it is pi? easy or difficult compared to silicone the original.

[saetta]

Hello all, sorry if I say nonsense, the black paste is not acidic and will ruin the ecu?