egr ford focus 1.6 edc16c34

[ecuboost]

hi, can anyone tell me if ? made the correct closing of the egr on the private car?
my friend had plugged the egr with a plate, and he lit the lamp,
initially I made it with time, I sent it to the friend to whom it was needed, and I said that it continued to operate, then recheck the file and I see that Time had left a bit ori, then it is stored and the sending, writes to me and tells me that it continues to work for? the error does not turn on ir?? not ? the first is that I do for qst drive, but usually I have not had any problems.
I ask one other thing, always on edc16c34 for? peugeot after the bumps of the egr, there are peaks in qst there are so, I reset only the bumps.

[ecuboost]

none of the 3 that have downloaded the file, can you give me a hand?

[marco]

you have to look for the better !

[ecuboost]

you have to look for the better !

I need to search for curves with peaks?

[faberecu]

are not those areas

[ecuboost]

are not those areas

I confess that I have never seen controls the egr on edc16c34 in qst so, anyway, I see that there are 3 controls, as ever I have lowered only 2? oversight or cos

[ecuboost]

anyway thanks

[eobdexpression]

Hello check the bit at position 18A1AA and bring it to zero and then using diagnosis check if the egr valve ? off.

[ecuboost]

Hello check the bit at position 18A1AA and bring it to zero and then using diagnosis check if the egr valve ? off.

in that position I can't see the maps, all fffff

[eobdexpression]

To how many bits you're looking at an 8-or 16-bit???