I want to try to change my elm327 usb plastic case black, but I removed the stickers, I can see the locations of the 4 screws but the screws are the same...and it seems to be welded to the plastic.
The person who has open pu? give me a few tips? I would not rovivare the houses in a way that I can't use it...
Good Sunday to all
S? or understood well.. you have to drill with a fuse by the drill in the holes of the screws.Originally Written by eartip
but why? you have to open it and edit it?
what's your problem?
But ? the classic with stickers, blue/orange?
I want to insert a switch on the pin to make it compatipile even with the adapters type 3
I also want to remove the resistor r4 4 and try to put on the can lines, the resistance and the condenzatore why? I do not work for the reset service
I also put a switch ? it is very comfortable. To open it, if there are screws, you can try as suggested by cinqueturbo, or try to pry gently with a cacciavitino tv, to see if the two shells tend to be open...
Then you have solved it?
Not yet but only because? they are off to work...the end of the week I do the change
hello
I had then resolved...there are no screws and are welded to the edges :-)
Write permission
Quote