Results 1 to 7 of 7
  1. #1
    BEGINNER
    Date Of Registration
    Dec 2013
    Messages
    56

    ecu bosch edc 17 bmw 120d 177cv 2007

    hi ,
    this ecu you can only do this in the boot or even via obd?
    if it is feasible only in the boot and you need to make changes to the map, you must every time aprilra and redo all the link to the tour?

    is there any trick to make it via obd?
    now it is a piece that is out..

    clarification on antituning: allows you to write part of it and lock the ecu,or does not write the ecu of all, and nothing happens?




    thank you

  2. #2
    THE AVERAGE USER (FO) L'avatar di passione motori
    Date Of Registration
    Jul 2013
    The resort
    Lazio
    Messages
    607
    Hello, saying edc17cpxx and without variants, it is as you have not said anything, then just studies a little more and you will understand that with a good tool you can work from obd of course, we always recommend a backup in the boot in case something goes wrong.

  3. #3
    THE ACTIVE USER L'avatar di munro
    Date Of Registration
    Oct 2012
    The resort
    EARTH
    Messages
    1,207
    I confirm there are some pre-antituning that you can do it easily from the serial edc17c02 for example....but coe says the passion motors a back-up, and repair the rear end...
    other,those antituning, you will have to open them and let us unlock T-prot with a good tool after the fact up here too, you can write via the serial also these..
    A rider does not create queues even in the car...
    a automoblista create queues even on a motorcycle...

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    89
    I also parerei the c... with a backup!! Especially on the BMW.... Cmq series 1 of 2007 will surely be a 17c02 then you can do it in eobd quietly...

  5. #5
    BEGINNER
    Date Of Registration
    Dec 2013
    Messages
    56
    good day, I do not know the pattern and satto have never been removed from its case.there's to disassemble..
    maybe if you recheck the files, some indication of me.
    I have a galletto . obd I is read, returning a file consisting of I don't remember how much data, but not write. piotrebbe be the interface is not adequate?
    in the bmw I know that they did an upgrade on the ecu,I would not have put in the antituning.

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    89
    If you have done the update in BMW 90 out of 100 have put the antituning, because hindsight, would you have written, unless you have problems with the Rooster. I say to you, usually on those cars the Rooster is quite reliable. However smontala trust, you lose a little bit more time but at least you're sure not to do damage. The board my, eh... then everyone does what he wants!

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    89
    However, the ecu should be a edc17CP02. I've done it in the obd, even with the Cock.

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •