scodifica total golf 4 SDI BOSCH 0 281 001 902

[giary74]

Good evening to all.
I have to make a scodifica total of the unit in question and I would like to ask your authoritative opinion.
I have read the eeprom B58253 indicated in the picture by setting the programmer 24c02c and 5 volts, in the absence of the 24c02.
It seems that the first part of the operation is successful.
Since? on the forum I saw that the file scodifica are compatible with the pi? cars, I asked a question:
I can try to write to the file called "ecovonix" or "total new beetle" posted in the section dedicated to file immo tested?
If so, just only this, or c'? need some other trick? (Ex. the eeprom in the framework Km, etc...)
Thanks

[legendaryslave]

tie will not stay stupidire put in motion

[giary74]

tie will not stay stupidire put in motion

Aoh, but who are you, superman?
Was hoping for a quick response, but I have to admit that your signature reflects your reality?!!!

[legendaryslave]

Aoh, but who are you, superman?
Was hoping for a quick response, but I have to admit that your signature reflects your reality?!!!

? a pleasure when I can help

[giary74]

PROBLEM:
with the controller set to 3.3v I couldn't read.
Setting 5v and detach the eeprom, I made it but I can not write.
Today I try with another programmer... I do not think that is the eeprom that waste to be "rewrite".
I have seen that ? gi? success, but do not know how they solved...
Any suggestions?

[obd75]

replace and put a 24c02

[giary74]

tie will not stay stupidire put in motion

I have replaced the eeprom according to the council of obd75 and I was able to write the modified file to Legend, Hope for the best...
In the meantime I would have to ask two questions:
1. With this file, it will remain lit lights?
2. I had heard around that the immo of golf ? in the instrument panel; this model is the exception?
Thanks

[legendaryslave]

no light on with this file, the immo ? in the picture that receives the ok from the transponder from the ok to the engine control unit

[giary74]

no light on with this file, the immo ? in the picture that receives the ok from the transponder from the ok to the engine control unit

The prophecy of the Legenday you ? true!!
No light on!!!
Sincerely I do not understand that around would make the immo of golf; with this scodifica, the control unit is ? dissociated from all the rest?
Can I know which program you have processed the file for the scodifica?
Thanks.

[legendaryslave]

Is the engine control unit dissociates itself from all the rest I did it manually with an editor in hex