correction km great point

[tuningdany]

hello everyone! I have a great point and I recently had to change the speedometer, now I find the display with the km ke flash, and are also 7000km in pi? of those that did? I! .. how can I fix these two problems??? thanks

[blackwolf76]

Really? they are two different problems that must be resolved individually.

To remove the flashing of the km you have to align the new odometer to the can bus of the car, this can be done with a diagnostic instruments, I have a bosch kts, and it does it without problems.
For the correction km you can use a special programmer for fiat around at an affordable price traveling through an obd, or see if someone on the forum ? of your parts ? pu? give you a hand.

[Backgroop]

hello tuningdany solve the problem ? very simple if you have at your disposal an Examiner, entering the Cylinder control unit instrument panel) and by the procedure for replacing the instrument cluster, the procedure ? feasible since the framework is not part of the contracted network architecture, the cio? is not recognized by the body in the network and signals the malfunction by flashing, by performing such a procedure ? can enter the km value that you want.. attention once inserted, the km value that you can't? pi? decrease..

[tuningdany]

hello tuningdany solve the problem ? very simple if you have at your disposal an Examiner, entering the Cylinder control unit instrument panel) and by the procedure for replacing the instrument cluster, the procedure ? feasible since the framework is not part of the contracted network architecture, the cio? is not recognized by the body in the network and signals the malfunction by flashing, by performing such a procedure ? can enter the km value that you want.. attention once inserted, the km value that you can't? pi? decrease..

hello! I have autocom cdp + 2013 with this program you can? I tried to look in the functions but I know that in addition to reading errors and taking them off does no more I'm autocom..

[alex68]

search for the function proxi alignment.

[tuningdany]

search for the function proxi alignment.

not c'? or, better, in a part of the program c'? but when I go to drag me to open an other thing.. as if he did not do that function, I don't know how to explain it..

[sparpaecu]

Can someone tell me the indicaper please, on the fiat/alfa/lancia function proxi alignment on autocom where you should find? I have looked far and wide in the various menu and submenu () in android? demo) but I have not found anything.
Thanks in advance

[fuorigiri12000]

Really? they are two different problems that must be resolved individually.

To remove the flashing of the km you have to align the new odometer to the can bus of the car, this can be done with a diagnostic instruments, I have a bosch kts, and it does it without problems.
For the correction km you can use a special programmer for fiat around at an affordable price traveling through an obd, or see if someone on the forum ? of your parts ? pu? give you a hand.

It is possible to do ir? times by increasing the km, or only once with the same framework.