The components to be

[Gia]

Hi
With the help of everyone, we could draw up a list of some of the components that we should have in the laboratory. For example, the resistances for the boot (sizes and quantities) mosfet( what? )etc....

[legendaryslave]

Eeeeeee stuff is never enough and the space is never enough

[munro]

tread interesting....I'm all ears....

[Gia]

We are all waiting, but nobody says anything.

I would start with the resistors for the bootmode

1kohm tolerance of at least 1%
680ohm tolerance 1%

Memories:
29f400
29f200
24c0?
95c0?

Mosfet
what?

[egs]

Okay the memories, at least the basic, you should always have, flash e2p....

[Gia]

Okay the memories, at least the basic, you should always have, flash e2p....

What exactly! By the boys, mica, who knows? what we are asking

[egs]

Be the E2p pi? used... the series of the st-95", series 24c series 93c, etc....then if you want to keep the flash 29f..***** o working you realize the best of what you can? to serve you...

[marcogti]

I have not looked if c ? gi? a poat but what do you think of the air station and soldering of precision?

[Backgroop]

Add strip 1,27, wire from 0.1 to 0.2 mm, the mosfet I don't see any use since they are of the transistors which are used mainly in systems of amplification and not as switches or various things, always as a semiconductor using the converters of voltage transistors that convert the 12v in 5v or 9v
one of the most? common and easy to use ? the transistor L7805,

[Gia]

Add strip 1,27, wire from 0.1 to 0.2 mm, the mosfet I don't see any use since they are of the transistors which are used mainly in systems of amplification and not as switches or various things, always as a semiconductor using the converters of voltage transistors that convert the 12v in 5v or 9v
one of the most? common and easy to use ? the transistor L7805,

the terminals of the coils, for example, from what are they managed?