hello guys..... I have a problem with a peugeot 307 2.0 hdi 110cv....
story the whole story, I read the car with mpps to do the luca stanca, I'm going to write, I got the program of the mpps moral, the car part.... I came back home with the edc15c2 in hand, dissaldo the 29f400 I read, I plan rewrite... and the car is not part.... not having the pin code, I remove the bsi with micro hc912, I couldn't find the micro-and decided to unsolder the 2 cards, in the meantime, after seeing that the goal was not to unsolder anything, I read with the upa on the micro, I get home and the next day when I go back in the workshop the other mechanic had already resolder the bsi.... I put the e2prom original, reassemble everything.... align with the lexia... the car is in motion.... after 2 minutes mega smoke from under the dashboard, and the bsi is going to get bless.... obviously the mechanic does not l' had welded well, but with a few pins short.... I'm going to collapse, I bsi and not c'? was to put it back in the bike.... at the end I decide and I am in total to the machine.....
mo' but' with the bsi different, I do not work the radio, not work for me the rain sensor even if reconfigured....
now ? the past a long time, and I have to finish fixing the machine, but I lost the original e2prom....
now I find myself with the original key, the reading of the micro of the bsi, and made reading the evil of the e2prom
does anyone know how I can do??? if you place everything ? possible to reconstruct the e2prom???
Perhaps with a reprogramming total the car in Peugeot may resolve.
I while ago I made on the same car. What had happened was that after it is parked, and shooting at a distance of an hour, the car showed no signs of life, and t the battery was charging. Made the prog everything is ok. You may ask a good technician in conce
Quote
