Results 1 to 4 of 4
  1. #1
    ACTIVE USER (OF) L'avatar di sportknight
    Date Of Registration
    Dec 2012
    The resort
    Matera
    Messages
    1,423

    great point version egr paranormal activity

    I will tell you about this experience

    They call me the egr is a great point,it's a 1.9 130hp
    the car goes well but there is the light on,I read and I see that the egr was already closed,and since the mechanic wanted eliminassi errors on the framework I delete the dtc from the map
    While we take a look at the car, we notice the egr off and then we hang up you
    cleans well as the pressure sensor of the turbo,the butterfly, etc.. ,all errors that had gone out after..
    Let's go for a ride and the car will not go..
    at this point, let's start with the various tests, but none of these is good for something
    we change even the sensor turbo pressure,check the throttle,remove the egr...
    We abandon the car for a few days..
    yesterday evening, I'm going to see, and me is a flash of genius,let me check the fuses because it is too weird that 3 sensors give problems, whereas before, he spoke to me only egr
    I open the fusibiliera of the engine and there is the fuse for the engine burned out,the gearbox and the car is fine as before
    Practically the egr was short and the genius of the previous he had detached in order not to have problems!!!
    I made to put the old egr half-route,egr off and dtc off,now the car is fine

    Can serve as an experience for someone else

  2. #2
    BEGINNER
    Date Of Registration
    Jan 2014
    The resort
    Chiavari
    Messages
    38
    Hello sportnight thanks for sharing I have a similar problem on a 159, I check. thanks a lot

  3. #3
    THE ACTIVE USER L'avatar di carlo abarth
    Date Of Registration
    Nov 2012
    The resort
    VESUVIUS
    Messages
    1,521
    you could disconnect the plug and remove the dtc ...I have made a 40 ina!!!
    What is a hare? A rabbit Abarth

  4. #4
    THE AVERAGE USER L'avatar di baraldino
    Date Of Registration
    Mar 2013
    The resort
    Modena
    Messages
    207
    It Happened to me to have the Egr in short
    some customers are often other garages don't want the plug to be detached, because if the machine were to go to some other workshop may reconnect
    In these cases, cutting the power cord and the isolo with termoguaina and reattaching the plug, so the job is running, not in the eye
    IF YOU ARE UNCERTAIN PLEASE OPEN

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •