Read write passat 1.9 101cv edc15p

[panterargento]

Hi to all, ? you can read and write with mpps v12, a passat 1.9 101cv edc15p 2001?
I have heard that you should remove a fuse, but I don't know which, and I don't know how to proceed.
Could someone help me?
Thanks in advance.

[msport (exil77grande)]

if you need the fuse number 11 and, in this case, mpps, is indicated in the notes at the bottom,once you have removed the fuse n11 the framework does not turn on but you need to make the usual procedure turn on the framework,ecu data,open file,write file, and so on then at the end if everything went fine, put the fuse and put in motion, at this point you will have the error drivers that you can turn off with diagnosis,good job.

[panterargento]

Thanks msport, as soon as possible we will upgrade? of the result.

The reading was good, the fuse no.11 was not present.
Thanks for the help.

[oakley1]

Hello with these vag ? well make sure that in the mpps is turned on vag bypass.. Which often allows you if the fuse 11 to read and write without disconnecting it

[panterargento]

But ? a function that st? on all the mpps?

[oakley1]

On the v5 c'?.... So I think also on the other

[panterargento]

I immediately gave a look and confirm that c'? the function, but there I had never noticed that before, or maybe I would, but I didn't know what to serve.
The next time I read a vag the attiver?.
Thanks oakley1

PS this option ? present only in reading and not in writing.

[oakley1]

Thanks for that . When I can very gladly