map A3 turbine plus

[marco1985]

hi guys, I have a audi a3 1.9 tdi 2007, and where ? installed a turbine is increased, which maps I'm going to touch up with titanium to have a good harmony with the new turbine? I still do not know the model of the turbine for now, but I'm interested to know what tap the afterlife? injection times and prex turbo, thanks to all, plan, plan comincer? at least to make changes with full knowledge of the cause, I'm not going to touch ridiculous, procedure to follow for some of the torque limiter? smoke?

[munro]

basically a crowd plus the door more air into the combustion chamber of an equal number of pressure and temperature of the air...
then you may require more fuel without smoking....then from the pedal and adjusting the various limiters you may apply more generally f? with a crowd ori.....translated more power smoke is almost zero with the requirements and limitations of diesel, adapted to the new flow of air with the crowd ori may not have for obvious reasons....

[marco1985]

thank you so much munro, but what you said you know already! the my problem ? understand HOW, but above all, WHERE to adapt the various limiters, unfortunately, are a newbie to the ecm and I don't know how to act on the program of precise in addition to prex the turbine and injection,to get exactly what you have written! ask for advice before messing around just because? you are more experienced on the program's?!
thanks a lot! if you place the file ori want to take a look together?

[marco1985]

I'm seeing 'c'? written well as under my nickname,BEGINNER hahaha type the " p " behind the car when you are a novice driver

[maku1977]

I first adeguerei good diesel fuel ( injection time) to the higher flow of air that the ec with a turbine increased, then from there if you want something more, you can tweak the other.

[maku1977]

that 1.9 originally how many hp it has???

[munro]

thank you so much munro, but what you said you know already! the my problem ? understand HOW, but above all, WHERE to adapt the various limiters, unfortunately, are a newbie to the ecm and I don't know how to act on the program of precise in addition to prex the turbine and injection,to get exactly what you have written! ask for advice before messing around just because? you are more experienced on the program's?!
thanks a lot! if you place the file ori want to take a look together?

there are no problems marco.....
email the file by opening a discussion in sec. "beginners" that if not me, others surely will give you a hand.....
are all the guys in the leg.....

[munro]

that 1.9 originally how many hp it has???

105hp......

[marco1985]

ok ! I open also dill? then! anyway thanks guys! the problem ? that as in fact I have read already here in the forum, many putteth forth his hand over the units to the *****without knowing what to do and go forward to trial, which is not ? absolutely in my nature to do! except in particular cases.

[maku1977]

bravo!!!! and that motor if touched correttamnete can give a lot of satisfaction!!!!