I made some changes to this map and I would like to know what you think of it.
already loaded on the drive and does not satisfy me so much of that? I don't seem so bad compared to the original, can be?
what do you advise me to do?
here is the map
I made some changes to this map and I would like to know what you think of it.
already loaded on the drive and does not satisfy me so much of that? I don't seem so bad compared to the original, can be?
what do you advise me to do?
here is the map
the map ? really very elementary, the cio? you touched on the maps right, starting from the right revolution for? in the wrong way.
you gave 15.9% increase in fixed in all the maps of the accelerator, the injection time that the ecm calls injection zoned, and in the torque limiters
the rail have increased by 50 points, the cio? 5 bar
tries to give increases in pi? gradual, starting, for example, from 10 to up to 20% in the maps accelerator
injection time go from 5 to 10%
rail incrementalo del4 or 5%
turbo pressure del6 or 7%
torque limiters go from 20 to 25%
c'? a torque limiter out of the driver at the address e82b4 and also to e7ca6
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
If it is your first map, I would say that as a beginning, not evil,follow the advice of magi1984 and you'll see the results
Unshared knowledge remains an end in itself.
do you say that ? for what, then, does not excites me so much of the mod. what have I done?
I make the change and put the mod
here I am, I made the changes with the tools will help you have given me, I hope I did well..
how is it going now?
for me it's not ? evil, I would have increased only a little bit at low revs am ? just a matter of taste, congratulations
also I think the map as before can go well. maybe too high the pressure rail. try it and let us know.
the rail pressure does not ? was increased to 50 bar, or no? ? too much?
es:
in dec I ori 13000 and that mod ? 13500 so are the 50 bar or more?
damage to nn do but I, I + 300nr nn salgo. personal taste but as it goes on the car ?? you've got to try??