Hello guys yesterday I did a diagnosis with autocom on a smart petrol, 2001, result in an error 06 knock sensor!!! someone can? give me some advice?? where I'm sensor?
Hello guys yesterday I did a diagnosis with autocom on a smart petrol, 2001, result in an error 06 knock sensor!!! someone can? give me some advice?? where I'm sensor?
is attached to the one-piece in the back of a casino take it apart, I would recommend you check out the connectors..
attention is not always the knock sensor, sometimes there are some problem with the engine, the cio? turns bad or not good..
The patience and virtue of the strong..
But no, that part is good, the only flaw that it has, ? I use a bit of oil!
Has anyone had the same problem?
those machines all consume oil, what not ? a problem only your.
for the knock sensor, make sure that you check the wires as said backgroop and on the sensor there is of oil ( dirty with the oil of the engine )
check the spark plugs....many are limited to only change the 3 spark plugs superiors, not knowing that the smart twin spark....
then have 6 candles....then check the 3 candles, lower.... at least if we talk about smart first series....
A rider does not create queues even in the car...
a automoblista create queues even on a motorcycle...
Also, according to me, this is not a sensor fault.This error came out because the knock sensor registered a detonation out of the norm.I confirm that I check the wires and spark plugs
Monday? I'll have a look, the candles have covered about 25,000 km!!!
I don't understand but if l error you are unable to cancel, and if it appears again after deleted?
no, not me erase it with Autocom!
Write permission
Quote