hi to all, I ask the opinion of the forum to see if I'm actually going in the right direction to exclude the egr on a ford fusion 1.4 hdi 68cv sid 804 sw3n11 I'm attaching the whole thing and we will place you already have the address where I have done the mod 076d70 to you the opinions on read mod done thanks and good job!
the egr on sid804 ? very difficult and I am in a few of those who know how to do.
the only way to know if it works or not ? feed the file and checking with the diagnosis, to the hand if the egr is working or not
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
hello pdtechnology,the egr l have tried it in the diagnosis if closed and you've done a few tests?these ford and all try to change from map to map,the increases let's say you started with a little percentage example lim torque 6%........
You do not really understand something until you can explain it to your grandmother (Einstein)
cioa guys to tell you the truth, I have not done any test, I'm doing the repairs and diagnosis I've found the error of the valve so I thought I'd delete it, and then I read the file and had a look to try to delete it.....I have seen that file ? quite complicated and I thought I would ask a help......I had seen those maps, thinking that someone had already experience....anyway, as soon as I finish the machine I do some test and I announce the results, but if in the meantime someone can tell me if I'm only going in the right direction, thanks anyway
Write permission
Quote