Good evening to all, in these days I bought mpps v12, now I would like to know a p? how to read my ecu, and especially if I'm wrong in doing something in the reading if I can cause damage to the car, I have a ypsilon momo design 105 hp
Good evening to all, in these days I bought mpps v12, now I would like to know a p? how to read my ecu, and especially if I'm wrong in doing something in the reading if I can cause damage to the car, I have a ypsilon momo design 105 hp
I don't know if you can read the ecu, or you can only write to,but if you could read do so?
with the ignition switched off, attach a booster or a battery charger to the car battery
connect the mpps to the computer, and then plug the obd of the car
open the program mpps and look for your drive in the list
if not c'? abandon the idea
if c'? check first of all that in the bottom left of the voltage is indicated in green, and exceed 12 volts
do ecu data(or ecuid) and see the information of the control unit
at this point, press to read the ecu and enter the name to save the ecu
follow what it tells you in the video
you will have a file to edit with ecm
once you are finished editing
do everything you like with the reading, but it got to the point of press laws ecu you have to press enter and follow what it says in the video at the end of the writing
5 eib minutes of waiting and terror
finished!!
if not you can read by downloading the file from the forum and you might even try to write it but honestly I would not do that unless you have a friend with the bdm that can help you in case of need
Thanks for the help
With mpps clone is not the ECU...
I do this with the tools ir? professional...
Make a buckup and getting better and better on this type of ecu
Unshared knowledge remains an end in itself.
With the mpps, not even in writing, do they?
Write permission
Quote