Bdm chinese clone,without software and without the possibility of a link,a help thanks

**sportknight** · 19-01-2013, 15:32

Hi guys
some time ago I had ordered a bdm100 from china? success a while before I qu?,then I was not yet aware of this site
finally after 2 months ? arrived,the damage ? the fact

now in the box is missing the software with the drivers etc.. and something to attach the schedule to the flat
I would like to know where to find this?

**giarras** · 19-01-2013, 15:36

I suggest you ask in the shop of the forum,you will find both the template and the schedule spring that will facilitate the use of the bdm,x as regards the sw nn there are problems with the obtain with no problems on the web.

**sportknight** · 19-01-2013, 15:40

let's say that I didn't want to still buy the jig saw that is enough

another thing,the schedule are all different but on 2 c'? written in delphi,I believe that one of the two is a siemens, in fact,it's not hard to understand for some'? from the photos?

**sno74** · 19-01-2013, 15:48

if you want to save money you can use those pins, but divi solder on top of the ecu tips female then we support those supplied is up to you to decide......

**sportknight** · 19-01-2013, 16:43

and for the software what should I do? I can not get it to work,the cd-rom, which I do not ? been given

**sportknight** · 19-01-2013, 16:49

sorry..but there are no 64-bit driver?

**sportknight** · 19-01-2013, 17:04

so,I did work with the driver version 1255 on a virtual machine in virtualbox
seems to work why? it tells me that the law of the interface, etc..,and I feel kind relais that attaches to and detaches,the only thing me connection error or 12v is not available? definitely related to the fact that the unit is not ? connected, but now I wonder,when I read from bdm I have to connect the control unit to the power supply or the power supply takes from the bdm??

**sno74** · 19-01-2013, 18:03

yes the ecu is powered there are connection diagrams

**sportknight** · 19-01-2013, 18:11

azz,so I have to take a 12 volt power supply

if a suitable power supply from the pc to the purpose?

**sno74** · 19-01-2013, 18:31

for bdm ideal ? power supply 12v stabilized 4 amp to test this, take a battery car charge go quiet then it takes you a figure.....

Discussion: Bdm chinese clone,without software and without the possibility of a link,a help thanks

Tools Discussion

Search Discussion

View

Bdm chinese clone,without the software and without the possibility? link,any help thanks

Write permission