correction cechksum with mpps

[ecuboost]

hi, I saw that for some cars the mpps says to correct the cks before writing the program itself by chance? the same to do it, but does anyone know how to do it? another thing if I edit the file with the titanium and I have the driver, corrects him directly?

[msport (exil77grande)]

then in the field when mpps is said that the automatically calculates the sw processing does not, however, when mpps tells you that it does not automatically make it the sw but only with exact driver,in the case of the titanium when you upload the file, and then you charge the compatible driver for the same file in the main screen in the bottom right you will find a written checksum, and then in the riquadrino a number that would be the family of the file if there is the number ck calculates him if you find spots, no, then you need to make sure that the face of the programmer in writing.

[ecuboost]

Nn I cpt ? to the contrary?but then the car that already? I wrote how I did that?

[msport (exil77grande)]

Nn I cpt ? to the contrary?but then the car that already? I wrote how I did that?

I'm sorry, what is' on the other hand,if mpps says that he is ok if mpps says that it is him who is doing it? the sw ok?
if in the bottom right out the number of the family means that calculates the ck him if they come out of the dots do not calculate, of course with corresponding driver clear?
I don't know if I have the herringbone bad, or you have to re-read carefully my previous message.

[ecuboost]

all cpt....

[Gerard]

to calculate the cks with mpps when it doesn't automatically have to do in this way:
click on the icon cks and open the file .mod to load, after a few seconds it re-opens a window where it tells you to indicate where the file is located .ori, select the file .ori and the cks is calculated by the program, after that you can write to the file .mod
I hope I have written so including

[tuommo89]

to calculate the cks with mpps when it doesn't automatically have to do in this way:
click on the icon cks and open the file .mod to load, after a few seconds it re-opens a window where it tells you to indicate where the file is located .ori, select the file .ori and the cks is calculated by the program, after that you can write to the file .mod
I hope I have written so including

thanks for the tip =) ...I had not yet understood how to do it! very, but very clear

[tuommo89]

I have a question I ...... if the inside of the ecu c'? already a file .mod made by the preparer, I have to put my map and calculate the cks , when it asks for the file .ori put to bed previously with mpps , the cio? the .mod and calculates it the same? or we want to the original force?

[msport (exil77grande)]

if mpps tells you on the basis of the machine ck calculated automatically in writing not to create problems write your file and does everything for him if, instead, says that the ck is not calculated in writing automatically, make sure that you have calculated you with the sw processing.

[ecuboost]

transparent