hi, can you give me an opinion on this map is processed with a TIME for luca stanca and EGR off Peugeot 307 1.6 Td 66 Kw engine 9HX. I would like to know if it is actually the modification is complete and correct. Thanks. I attach Ori and Mod.
THANKS
the difference between the two files are for the egr closed. you haven't posted ori
I have attached the file ORI and processed with TIME . Maybe I was wrong? Try again to attach the ORI and the MOD separate. I look forward to the opinion
Thanks
I would like to help you but I do not have the permissions cmq nn trust time doing damage I'm software ..
the egr is closed, but the problem is that you have all the error table zeroed out. In the case of troubles in some component you're going to crazy who needs to get their hands on. In Fap, instead, that machine does not hold it , and then not to process the file for the luca stanca... doesn't need to.
Thanks blackwolf76. I had this suspicion. If you have the time and desire I can confirm that for the closure of the EGR just take it to 0 (zero), the two panettoni close to the addresses 1C4984 , or even curves to the addresses 1C7C2E ? I attach sceen-schot of that may be useful to other users.
If you do not have other problems just reset the two panettoni.
I would recommend you to do a nice luca stanca+EGR from the service of the forum so then he begins to understand a little Theory of what is good or not!! also as you have been told above by the guys, The EGR was deleted, but with a flood of DTC are cleared in case of other problem don't know a ceppa!
If you want to find a friend first, YOU have to Be.
Quote
