Page 1 of 2 12 LastUltima
Results 1 to 10 of 20
  1. #1
    THE AVERAGE USER
    Date Of Registration
    May 2014
    Messages
    151

    giulietta 170cv iq that goes for the facts its

    hi , I'm trying to moddare the file in the my juliet , I've done various logs , that place below
    the gist of the situation is that I would like 80-85mm3 fixed over 4000 rpm... from the log that you place , as you can see the 85mm3 you do see every so often in these conditions
    3rd gear at 4000 RPM I have a nice 85mm3 from the log
    4th gear 4000 RPM I have about 78mm3 log
    5th gear 3750 RPM (I had to restrain) 76mm3 , and then to climb up the rpm would go still down...
    now I don't understand why , I have calculated that with the lambda I have in the map ori , 1.05 of fixed and 1050mg of air (from the log I read over 1100mg) it should give me ALWAYS at 4000 RPM 80-85mm3 (with small changes of air read by the maf), and instead I find myself at values much lower iq (65-70mm3)
    how is it possible this thing? limiters iq for march are up , and the same lim pair , pedal , egr off, lim iq ... not I ****
    File Allegati File Attachments

  2. #2
    THE AVERAGE USER
    Date Of Registration
    May 2014
    Messages
    151
    no one? ...

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Jun 2013
    The resort
    Italy
    Messages
    196
    Hello,I also have the same problem on my giulietta after 3500 rpm the iq goes down, must missed some limiter or some sort of control to turn off.

  4. #4
    THE AVERAGE USER L'avatar di Errecinque
    Date Of Registration
    Mar 2014
    Messages
    909
    The solution should be in a limiter which has on the axes of the temperature and conditions in a percentage (like the maps the pedal). That is, the value corresponding to 8192 (100%) you have an iq lower than what you want. For work, I open the pc a map for weeks but if you cannot find it, I give you the addresses.

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Jun 2013
    The resort
    Italy
    Messages
    196
    Thanks R5, to be thorough I double checked the whole map, I also tried the value 8192 in the whole map and I went to comb through all of the addresses. I have not solved a head of cabbage, I have not found anything. The strange thing is that in the first, second, and third everything is ok. What I ask me. But by the fourth, fifth, and sixth, after 3500Rpm the IQ drops. I doubt that there is some limiter for these 3 gears that I have not found, even if a lot of limiters for gear I get up to 50nm in order to manage everything from the limiter only.

    The discussion is not mine, maybe bmw320cd has already been resolved, also because I've seen only now that he has not written since June. For me, it is irrelevant to post my map, or work on her, or I can create a new discussion.

  6. #6
    THE AVERAGE USER L'avatar di Errecinque
    Date Of Registration
    Mar 2014
    Messages
    909
    Post your file golds that between Saturday and Sunday I hope to have a moment ****** to give us an eye

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Jun 2013
    The resort
    Italy
    Messages
    196
    CiaoR5, I have attached the file ORI more 2 mod with different setting of the limiters IQ. There is also a log attached, as you can see, the iq drops in both maps by 4000Rpm. But I noticed that in the map with the IQ from 90mm3 up to 3500rpm and then to climb, in spite of in the range of 4000rpm both maps have a limit 85mm3, a from in log 80mm3, and the other by 75mm3. All this, however, only in 4, 5 and 6 march. From the first to the third one that I ask. I tried to moddare also two maps after the pedal (1B3374) that seemed limiters, where the index I number gear and then a percentage, I have reset the 3 cakes but nothing.

    In addition, in a test, I tried to make the limiters iq to the team. setting always 85 fixed without considering the optimal value.... nothing, even them the same. The iq drops.

    However, I do not understand why in the two maps attached, where to 4000rpm I have for both 85mm3, in a map I am limited to 75, and in another I am limited to 80.

    I provatoa rechecked everything, but something escapes me.
    File Allegati File Attachments

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jun 2013
    The resort
    Italy
    Messages
    196
    Citazione Originally Written by Errecinque Visualizza Messaggio
    Post your file golds that between Saturday and Sunday I hope to have a moment ****** to give us an eye
    Advice? :-)

  9. #9
    THE AVERAGE USER L'avatar di cinqueturbo
    Date Of Registration
    Sep 2012
    The resort
    The Milky Way
    Messages
    2,407
    Have you tried to put the maps smoke Gold?
    "The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Jun 2013
    The resort
    Italy
    Messages
    196
    Hello R5, in some previous testing I have tried, but if I remember well, without success. Now I want to try again for the sake to put it ori, also because already so it should allow me to get to those limits. I want to set max 85 up to 4000 and 80 to 4500. Change the step because I found a pair of points x iq altesopra 3500 rpm that the injection ends at about 6 degrees advance. I also wanted to take a look at a map of the 159 2000 170cv, just to see if there is any difference or limiter on the giulietta is set. Already acchio after the map request, there are a couple of maps on the 159 are at 0 and on the giulietta are set. Before, however, try the advances, I wanted an opinion from you that surely you are more expert.

Page 1 of 2 12 LastUltima

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •