Egr off mjd8 f2

[riox80]

After reading a qubo 75 hp with gallov54 and file to 2 megs...I would like to exclude the egr....I have read various addresses, but I do not match...in short, find the value hex 379e...I do not find it because the addresses are not the same as my file....I had read to go on 1DCC12 ...but I have no 379e

[CLAUDIO.]

you need to look for in hexadecimal) 16-bit motorola

[cinqueturbo]

After reading a qubo 75 hp with gallov54 and file to 2 megs...I would like to exclude the egr....I have read various addresses, but I do not match...in short, find the value hex 379e...I do not find it because the addresses are not the same as my file....I had read to go on 1DCC12 ...but I have no 379e

I've done a lot of 8DF.. 379e has nothing to do with the EGR etc..

saw that you posted the file gold of here, need the info "as usual, we speak to the wind"

have you read about the pseudo-file to the address 1DCC12 you have to modare bit 379e take that file, and identifies the zone and seeking the same on you..

[riox80]

I can't seem to attach the file...I can attach photos...video...***** and you?

However, I found the hexadecimal value 379e....address 1DCC12.... how do I change it?

Already brought to A147......what do you think?

I have brought this value to a threshold of about 17v practically will never turn on....

[cinqueturbo]

Very good!! Bravo!!

what do I think about?

If you are referring to "Battery voltage threshold for shut-off enabling"

Are you clear that

1° it does not work start & stop

2° to the 99% will be in a block as sink the pedal..

personal experience, happened on 2 different cars in 3 years ago to be discarded as a solution..

Six of the TOP cloth I have to say,

since you get bored or too complicated for you to take a look at FAQ or do a search on the forum,

I explained to a guy tonight the same thing, and the ec failed to see you..

1 To upload a file you must use the advanced mode

2 compress it with winrar or zip

3 if not present in the database, the file Ori it loads them in (right section) and named him "Programmatore_Modalità Lettura_Marca_Modello_cilindrata_cv_hw_sw in sum, as god commands..

4 if you already and the present copy the link and paste here in the discussion

Thanks and good prosequimento

[riox80]

From the phone I can not insert the file..
A little patience and I organize myself differently....
Addresses, rightly, not me, has given them the fiat...
Otherwise I didn't write on this post...
I have chosen to move that bit because in many discussions, we are speaking only of the last quest...
I have not loaded the map I was wondering just a tip, but given the circumstances I see otherwise...
The values for egr of mjt2 and precisely mjd8f I don't think that will change with the change dell hw and sw.
Who wants to help me, I aid those who do not, please do not intervene in the rear

Here is the file

[cinqueturbo]

To address 1DCA7A Esa 0001 set 0

[riox80]

I have prepared the file...but the explanation technique of this change? I'm curious... and then it is true for all nevertheless, of the 2 generation? Grz

[cinqueturbo]

I have prepared the file...but the explanation technique of this change? I'm curious... and then it is true for all nevertheless, of the 2 generation? Grz

EGR Shut-Off for Engine cut-off Enabling Switch

This is true for all 8DF each SW has its own address..

[riox80]

Perfect.....grz