Hi jungs,
I have a question regarding my friends 147 Q2, after remap that he had on it, the car want go more than 190km/h and the fuel consuption is too hi, up-to-12l.
Anybody generous to look at the map and tell me whats wrong?
Ori-and-mod-datei are in the attachment
remapped datei is made very bad.
about 95% modification of your are out of range", " means that the range modificated are not interested during normal driving of the car.
and if treiber is not driving with accelerator full floor , car is 100% as production.
very soft and not necessary the modfications of pressure common rail.
Thanks allot, I will try to reduce-rail-pressure.
Im thinking about also to reduce the injection maps for 10% and duration map, but what confuses mir is that the turbo pressure is increased just a little bit.
Any suggestions about reducing?
fuel consumption is not affected by any of your modifications.
may be is increased only because you are driving fast and strong searching for performance hard to find.
max speed is not increased because you don ' t drive-in-the-points you have changed
fuel pressure-return-standard.
injection map is good increase value but extend more wide the increment
turbo is not bad
Ok, die will lower the rail pressure to the standard, injection map will wightend through the whole table.
Max speed is affected by what map? I saw that the max speed limiter is left as standard-299,99.
Antwort Zitieren
