Results 1 to 7 of 7
  1. #1
    THE AVERAGE USER L'avatar di giuseppe89
    Date Of Registration
    Oct 2015
    The resort
    Naples
    Messages
    494

    Info ecu sid 206 kuga and any scodifica

    Hi to all guys I managed to get an ecu the engine of ford kuga 2.0 tdci 136cv, the latter is "marked" Continental SID 206 with a variety of codes which I did not understand what you refer to hw and which sw... the first under the heading "sid 206" is 5ws40862c - then there are others including 8V41-12A650-CB, and other acronyms 4-5 letters.My first question is: the ecu sid are "siemens"? so this marked continental?in addition, since my colleague has a kuga with this engine you can scodificarla to use it as a truck?it is possible to completely?some time ago I heard say that on these ecu was only possible to go physically to the code of the immo from the ecu "old" to the "new" via the ignition "start-stop" of the transponder key. someone's got to do with it?thanks

  2. #2
    THE AVERAGE USER L'avatar di giuseppe89
    Date Of Registration
    Oct 2015
    The resort
    Naples
    Messages
    494
    None that tell me at least if it is scodificabile or less? I can not find info around...I have to look for ecu siemens?

  3. #3
    THE AVERAGE USER L'avatar di Errecinque
    Date Of Registration
    Mar 2014
    Messages
    909
    I don't know this ecu, but since that is a truck I would open it and see if it has the.port bdm to read it.

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Feb 2016
    Messages
    108
    Hello, the ecu sid are siemens, with regard to the word "continental" is only a code but the ecu is sid. With regard to the scodifica of the ecu of the kuga of your colleague and use it as a truck you can do so safely, provided that the codes of the 2 control units match, otherwise you have to replace everything.

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Feb 2016
    Messages
    108
    Hello, the ecu sid are siemens, with regard to the word "continental" is only a code but the ecu is sid. With regard to the scodifica of the ecu of the kuga of your colleague and use it as a truck you can't do it because of the transponder key, the car will not start.

    P.S. I apologize for the previous answer was wrong.

  6. #6
    THE AVERAGE USER L'avatar di giuseppe89
    Date Of Registration
    Oct 2015
    The resort
    Naples
    Messages
    494
    Ok thanks blackfog so with this ecu I can't do anything? How it works in case of failure of an ecu like that?

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Feb 2016
    Messages
    108
    Nothing figured Giuseppe89. No unfortunately you can't use this ecu. In the case of failure of an ecu of the genre but replaced all the aggomerato, then the ecu, body computer, is to be replaced with the code key.

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •