Petrol aspirated.....what and how to touch, to squeeze what little you can...

[Pasticciona0]

Hello to all, in short am going to read a fiat stilo 1.6 2008 105hp engine ecotech, his request is to have a little more boost in the lower...
I know that the only things that I can touch on the gas which is sucked in is advance and iniziezione...but with what criteria? that calculations you need to do?
I have to start from the ABC of chiptuning....use ECM titanium....I thank you in advance.

[Pasticciona0]

Hello to all, in short am going to read a fiat stilo 1.6 2008 105hp engine ecotech, his request is to have a little more boost in the lower...
I know that the only things that I can touch on the gas which is sucked in is advance and iniziezione...but with what criteria? that calculations you need to do?
I have to start from the ABC of chiptuning....use ECM titanium....I thank you in advance.

no one helps me please

[munro]

hello messy..first you need to log the car and see, above all, when you are placing with the afr then you monitor the advances and see if you have a deviation between the advance map and the actual ones that the ecu aplicca...the same speech, you have to see to the stoichiometric ratio a bit to all the schemes(afr=air fuel ratio) sappiu, however, that on a naturally aspirated is very hard to work out big differences of loan only by acting on the ecu.*****s, to give a little more liveliness in the bass by a couple of degrees of advance, especially with the advances to the loads in the intermediate and controls the detonation to see if the ecu is not is removing in advance if everything is ok check the any limiters in the throttle but with titanium is not easy so you need winols with its damos that I think is easy to find because in reality the stylus features a engine ecotec opel-gm...
however, you know that the lambda by 14.7 to aspirate the value in the map, usually 128, and you can see 8bit
so if you require that 90 of the lambda you are "gaining weight" (90/128)*14,7 AFR 10,33...
I am attaching a nice document very useful...if you have any questions please ask...

[Pasticciona0]

hello messy..first you need to log the car and see, above all, when you are placing with the afr then you monitor the advances and see if you have a deviation between the advance map and the actual ones that the ecu aplicca...the same speech, you have to see to the stoichiometric ratio a bit to all the schemes(afr=air fuel ratio) sappiu, however, that on a naturally aspirated is very hard to work out big differences of loan only by acting on the ecu.*****s, to give a little more liveliness in the bass by a couple of degrees of advance, especially with the advances to the loads in the intermediate and controls the detonation to see if the ecu is not is removing in advance if everything is ok check the any limiters in the throttle but with titanium is not easy so you need winols with its damos that I think is easy to find because in reality the stylus features a engine ecotec opel-gm...
however, you know that the lambda by 14.7 to aspirate the value in the map, usually 128, and you can see 8bit
so if you require that 90 of the lambda you are "gaining weight" (90/128)*14,7 AFR 10,33...
I am attaching a nice document very useful...if you have any questions please ask...

Ok, let's say that I understood only a little but having the information from directly, I know what to study. Sin for the attachment, I still can't download it
it is difficult to get to 80 messages (without cheat of course)...you can ask to send it to my **** true?
and, as usual, a big THANKS for all the help you're giving me...see if I can get winols

[munro]

for winols, you have to first download the demo version from the site evc and then install the final version, it seems to me that in the forum there is the guide to install...
for the image posted, you can also search on the ****** type the words stoichiometric ratio, and do a search for images you will see that you will find interesting things..
for your **** I could not tell you if you want to put it...
hello

[Pasticciona0]

for winols, you have to first download the demo version from the site evc and then install the final version, it seems to me that in the forum there is the guide to install...
for the image posted, you can also search on the ****** type the words stoichiometric ratio, and do a search for images you will see that you will find interesting things..
for your **** I could not tell you if you want to put it...
hello

I hope not to be violating any rule!