as the title
clear tested 500 siemens VDO 51782985 5WK43808
as the title
clear tested 500 siemens VDO 51782985 5WK43808
Last edited by msport (exil77grande); 07-01-2013 at 00:15
it should I do,I open it but I can't find the e2p you know how to recognize it
GALLO ORI + KESS V2 ORI
? smaller than those in the standard is close to the condenser in the anolo of the ecu if you take a picture you pointed to
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
I found it,but I do not know how to read it,counsel?
GALLO ORI + KESS V2 ORI
read it as a st 95320, or tell me what you read above.....
the problem ? that ? pi? small compared to the classical e2p,and I wanted to know which system to read it,if I have to unsolder
GALLO ORI + KESS V2 ORI
unsolder then there are adapters or solder, or the spring to put inside in the controller if the controller ? equal take a ep2 new and write it down clearly controls the frame for? maybe it was better that flipped open a post, otherwise the administrator then we scold if you need more there? problem......
After I ask him to change the post,but my problem is the video is not a e2p normal and smd
GALLO ORI + KESS V2 ORI
change the post and post photos cos? let's see.... I have gi? made three, I had no problems, also one of the new bravo ? similar....
there are adapters weld-on or spring-or do as I did with the first wire small copper you connect on the pins in the pidinature ? equal to the e2p pin 1 is on the dot
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Write permission
Quote