dpf off.... problem diagnosis...

[david]

hello..
one of my dearest friend.. I made the swich off the dpf on the alfa 159 restyling..

on her.. pre restyling works correctly... no damage, and correct parameters..

while on my.. these values..

1.jpg2.jpg

the state particulate filter and clogging.. are high compared to their...
who knows the reason for it.. and how to solve...

[mariodarkblue]

Hello, I made the switch off of the dpf and lambda...but your maybe ? euro 5 and doesn't work...I unfortunately I can not help:/

[leandro89]

post ori and mod cos? you you can? give more? help

[david]

out of respect for those who made me the pleasure (or not for a fee) do not place the edit..

however, alfa romeo 159 1.9 q tronic 150 hp my09

[SandroMarciano]

yes, first thing to check ? if ? €4, or 5, and then email the file. Then I did not understand, you d? any error in diagnosis? if yes, which (...)?
The dpf of course ? was also physically removed and in addition the map right?

[david]

euro 4 with dpf.. 1.9.jtdm 150 bhp..
edc16
576_754

I forgot...
the dpf.. and been emptied.. (only the ceramic part) and I held the catalyst..
my part.. of the 159 with clogging problems to 1000 with ecusafe...

[Gia]

I forgot...
the dpf.. and been emptied.. (only the ceramic part) and I held the catalyst..
my part.. of the 159 with clogging problems to 1000 with ecusafe...

Clogging with ecusafe to 1000% do not ? a defect, but a strategy to remove the dpf. You can walk the quiet. In any case, from the image you posted you're not 1000% so you did the right removal.

Mail ori and mod!

Dimaneticavo! after the removal ? a good rule to start the procedure of replacement of the filter

[msport (exil77grande)]

out of respect for those who made me the pleasure (or not for a fee) do not place the edit..

however, alfa romeo 159 1.9 q tronic 150 hp my09

I respect your decision not to post the changes of others, but in this case we can not help you a good continuation.

[david]

then this screen, and now in the car.. the map ori with ecusafe... with the correct clogging...

110.jpg

if you want to place the original.. and the one processed with the clogging 0

but to be fair not place the map made by my friend...

was wondering if there is any parameter.. from tap to reset to 0 the clogging... as with ecusafe.. and bring back the state of clogging ok..

I repeat..

the same changes on a manual car older.. give all the data ok..

[david]

ok.. can you give me advice if you don't place the map..

but at least.. say that I can get? from the chart.. the most recent regeneration has occurred 4000 km ago... and the machine does not regenerate with the swich off..
or it's better to bring the state and the clogging of the particulate matter.. to keep it as a definitive map?
let's say I ask for an opinion.. interpreting the values read.. both with ecusafe.. that with the switch off..