Mpps reading golf 2.0 tdi 140 cv

[ct46]

Hi, I recently purchased mpps v. 12 yesterday for the first time, I wanted to try how it worked and me ? happened to have a golf 2.0 tdi 140. Cv connect the equipment I read the id of the car and then I go read the file ori and I immediately error and asks me to send the log to the manufacturer, some of you have had the same problem? I have to say that with a cock I can do it safely but I wanted to know how ever is not to be read already? misfired on the first shot ? Thanks

[speed]

Test on the other car, if that does not work defective and happened to others.

[msport (exil77grande)]

Test on the other car, if that does not work defective and happened to others.

I would say not to go straight on is not working,then what size is the file that is read with the rooster?
that protocol specific you have selected on mpps?

[giarras]

msport has the right, in the meantime, try with another car, cos? are you 100% sure its working then on the vag group ? most important, the protocol used may be from 1mb or 2mb depends on the type of ecu.

[ct46]

then the selected protocols in the mpps are (2.0 tdi bosch edc16u1 k-line), and (2.0 tdi bosch edc16u31 k-line/can) with both knew the id of the ecu but didn't read and gave me always the error log. with regard to the cock I have used I have sent the customer to Saturday pm. but I know that with what I do quietly.

[msport (exil77grande)]

then the selected protocols in the mpps are (2.0 tdi bosch edc16u1 k-line), and (2.0 tdi bosch edc16u31 k-line/can) with both knew the id of the ecu but didn't read and gave me always the error log. with regard to the cock I have used I have sent the customer to Saturday pm. but I know that with what I do quietly.

then the files have not read it yet?
possibly let us know the size when you read it.

[ct46]

Ok, I'll know

[ct46]

With mpps or did all the tests nothing, I tried to uninstall everything and re install it even with galletto 1250 (I have to say that I have done quietly on a golf 5 plus 115 hp 1.9 tdi ) I don't like the read me says to connect pin k-line. There have been bad because? I was convinced that with the cock, I could solve all and instead.... There is an interface between the pi? stable or do I have to do it for strength in the bdm? Thanks

[msport (exil77grande)]

With mpps or did all the tests nothing, I tried to uninstall everything and re install it even with galletto 1250 (I have to say that I have done quietly on a golf 5 plus 115 hp 1.9 tdi ) I don't like the read me says to connect pin k-line. There have been bad because? I was convinced that with the cock, I could solve all and instead.... There is an interface between the pi? stable or do I have to do it for strength in the bdm? Thanks

I doubt that it was a golf plus tdi 115hp maybe you meant to write 105hp,for the rest one of the best clones of the moment and' the rooster v2 that you find also in our shop on-line,however, being in your area if you need technical support can contact me in pm and we agree.

[ct46]

Ok msport many thanks, will contact you? to the pi? soon cos? we solve together, because we are in the same area .sorry for the mistake in the golf plus and 105 hp.