Results 1 to 8 of 8
  1. #1
    BEGINNER
    Date Of Registration
    Sep 2016
    Messages
    7

    nissan primera 2.0 diesel 1998 -battery cables reversed

    Hi to all,
    as the title suggests ,my friend reversed the battery cables . My question is : beyond that it has burned the fuses,and
    it is possible that it has damaged the ecu ? He said that he has changed all the fuses, but the framework does not turn on.
    Will not lay to laugh, (he cheated ) it was an oversight .

    Thanks
    Zana

  2. #2
    THE ACTIVE USER L'avatar di munro
    Date Of Registration
    Oct 2012
    The resort
    EARTH
    Messages
    1,207
    Happened to me on a quasquai 2.0 dci that the guy had left, slightly slow on the ground wire after replacing the engine... result is the ecu fried.

  3. #3
    ACTIVE USER (OF) L'avatar di sportknight
    Date Of Registration
    Dec 2012
    The resort
    Matera
    Messages
    1,423
    the ecu fry for a lot less,I figured if you don't fry by putting the cables to the opposite...

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Nov 2015
    The resort
    Rome
    Messages
    89
    it can also be that it is burned but strange that not turn the picture review the alimentazionioni

  5. #5
    BEGINNER
    Date Of Registration
    Sep 2016
    Messages
    7
    thanks, today we will try to recheck all the fuses and even the battery .
    We hope that you have skipped something ,I think ecu is the more expensive of the same machine.

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Jul 2016
    Messages
    228
    hello, I should not have burned go quiet replace all fuses, check relay
    Citazione Originally Written by zana Visualizza Messaggio
    thanks, today we will try to recheck all the fuses and even the battery .
    We hope that you have skipped something ,I think ecu is the more expensive of the same machine.

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Jul 2016
    Messages
    228
    and important to check over the fuses and also the relay ... let us know

  8. #8
    BEGINNER
    Date Of Registration
    Sep 2016
    Messages
    7
    solved, thanks to all for the help .
    Had not changed fuse, 100A ,couldn't remove it and it was enough to raise the container of the fuses ( moving joints that kept him up gently ) and unscrew a screw .
    Had not seen him .
    If the got away with little ,it all works .
    Thanks again

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •