Hi guys
I'm making the ability to write the file to a EDC15P from VW or Seat, and write it on a EDC15P audi...
according to you... since you aesthetically are the same... you can write to the file of the ecu, or maybe a cupra fr 160cv on an audi 130hp?
don't make experiments at random, the units have numbers, hw and sw, and to replace you have to follow these, then there are units conpatibili, but in any case must be of the same family, then everyone does what they want but on these things and always moves with a logic.
ugo ---- president A.E.P.
Aesthetically they are all identical......enough!!! The most sensible thing you can do is to take inspiration (if mechanically the 2 machines have the same components) from the map of the cupra and transfer the values of the maps on the files of the audi.Originally Written by ciullo.eugenio
I once I put a map in a mercedes with another, which was the same as the hw and sw, and everything went ok
I have a lot of measures taken by the cupra type:
turbine, ic, map sensor, and camshaft bearing...
I wanted to take the software of the 0281011852 ibiza cupra fr 160cv with soft 038906019MS SG7000, and write to the file on my 0281010981 with soft 038906019FT SG1577...
I don't know how much changes between the two, aesthetically and also within the chips are placed on the same layout, I don't know how is implemented the communication between the bus and the processor... but wishing I could give it a try... only that I fear... someone of you has ever taken a chance like that?
But sorry....you have the ecu of the cupra? Or only the file?
I only have the file read from a cupra...
by comparing the numbers of hw in the database, bosch do not seem compatible, then if the two sw you can throw an eye on and see the difference in the portfolios.
ugo ---- president A.E.P.
in annex I put the two sw... they look a little different watching them in 2D
Hello, the file from another ecu you can enter by checking the part of the Hardware is the same both edc 15 and edc16, the difference in edc 16 you must enter not only the file but also the micro..
Write permission
Quote
