Opinion Map Alfa 147 Ducati Corse EDC16C39 966.729

[tranky]

Ave people,
I am working on a ecu as the title which already had a mod above (I don't know if from home or done from the previous owner), the issue is that now this car is 170cv with his mod, and currently have been made the changes on the exhaust pipe to direct, delete the EGR, and I think also removed the FAP (I'm not sure as I have not yet seen the car but I assume of you).
Presumably you have already disabled the DTC relating to the deactivation that I have not checked honestly but I will do it in a second time.
I share the ORI(150 hp), the mod 170 of the house and my mod with a few tweaks from the mod of the house.
Please give me some advice because the customer (my friend) wants to take it over 200cv and I hope that with this mod, I at least came close to the goal.
I increased the turbo of 150 points as my edc16c39 882 120 hp, assuming that the increase is a mirror, if I am wrong give me the info that I correct it, while inj I have increased 4.5% in the scale of the scheme from the ori966.729.rar.
Thanks

[tranky]

Errata..
The ori is 170cv but rolled the car had a little more of 160cv.
The ecm to me it was all wrapped up.. Sorry..
I look forward to your opinions if the map loaded okay but lacks a cue from 2000 to 3750.
I'm tempted to put the full load of the turbine between the 2500 and the 4000 to 170punti of the increase from gold and 50/100 on the 2000/2500
What do you think?

[switing63]

Hello, unfortunately I have a user who has not yet reached the minimum limit to be able to download the files so I can not see your that you have posted, but I would like to discuss this control unit, because they are still in phase of study and among other things I am comparing the various maps of the jtd, in its different versions. Also keep in mind that at the moment I have no practical experience because, as I said, they are in a learning phase, and then I could say a lot of things wrong, but as they say practice makes perfect.
I think it's hard to go over 200 Hp only in the map and indeed I think it is already difficult to approach.
So the nose 170 points higher on the turbo it seems to me a lot. The turbine of the ducati corse is a honeywell-garrett GTA1749V and that is the same as the 150hp 16V €4, that the 150 hp has a limiter to 2400, while the Ducati is already working on the series, 2550 to 3500 rpm, then it seems to me already brought to its limit by the house in the map original, and then go on to other 170 points, as I said, it seems to me so much, then probably I'm wrong, but this is my opinion.
According to me if your friend wants to reach out to those powers, should put it in the budget to work on various mechanical parts, turbo in the first place.
Not being able to see the file posted you wonder if you have changed the map of the injection times, because it seems to me you stop to 80mm3 from the original, and then to be able to inject larger quantities of fuel need to calcolarti the time needed for larger amounts, for example, 85 or 90 mm3 (I don't even know sketch the calculation, so I'd like to figure out how to do in these cases because I don't think is a linear function) otherwise this map is in a certain sense works as a limiter, and with only 80mm3 of fuel I doubt you'll come close to 180 hp.

[cinqueturbo]

I was tempted to write two or three lines in the try to help you in the best way possible, but really I see too many errors I can't think of words adequate to express myself in the best possible way without offending your work...

so I suggest you read a few posts specifically on these ECU and the car is on the forum

Or
entrusted to the service file online
1 when you get a job DOC
2 You will have a file made with logic and optimized for this car.. and the other that will reach you..

[tranky]

Cinqueturbo allow myself who are still a novice and I have seen that the way has mooolte things that are not.
Seeing the way that was already loaded above, we note a majority on the lower revs as if the car had been developed to tow more than sprint.
I mean from the map ori, and I will post the finished work.
Switing I am also in your situation and ****llo, in fact, are here to take offense (as you can see above) and take the info to grow.

[tranky]

Cinwieturbo thank you for the advice but I prefer to sudarmi the map, even if you SR will take months rather than make me do the baby food ready.
I accept any advice from someone who has already developed this GT.
Thanks

[cinqueturbo]

Cinwieturbo thank you for the advice but I prefer to sudarmi the map, even if you SR will take months rather than make me do the baby food ready.
I accept any advice from someone who has already developed this GT.
Thanks

Ok Ok as I get the time you shot down the oversized maps in this file and see what I present as the work..