chevrolet captiva dpf off help edc16c39

[acidborn85]

hello I am trying to defappare this chevrolet captiva, who can take a look if that's okay?
Before writing I would not block anything.
how do I bring down the ****llo clogging the dpf? I know that there is a guide but I do not have the permission to download it, someone can recommend something?

I am attaching the file

thanks in advance and happy new year to all

[sisco]

Definitely if not put the file ori (in the database, if it is not already there, and put the link here) who is able to help you (not me because I can't do it) can't do it.

[max40]

It is a edc16c39 is not difficult you can do it safely and don't be afraid to write it these are without problems ammeno that you have a serial poor .. never read it in bdm first and then do your tests from the obd, if you go wrong, the resume bdm ...
also wanting to give my help but I can't download your file .. in fact, I can't download none .. maybe I do not have the permissions or I don't have enough messages .. I understand ..

[acidborn85]

here are attached a couple of files made with two different software from two different people, one with ecusafe, the other I don't know but looking at it in 2d seems better though I don't know what has touched

[acidborn85]

that is, I plugged in the original + another done with a software which I have wanted to say the name, the other with ecusafe I posted before, what do you think is done with discretion or it is better to entrust myself to the service of the site?
I wanted to ask for advice on how to reset the factors of clogging of the dpf, I have it from the diagnostic software before or after you changed the ecu? there is a specific procedure?

thanks

[Errecinque]

If it is a c39 €4 it should be possible to do the switch off dpf as already tested on the c39 fiat group. That engine mount?

[max40]

hello acidborn85, it should be type opel antara, which then are type fiat engines .. for the fap off I do not remember if this version should make made the emulation or just switch surely if it is opel or saab etc, I advise you to delete P2002 and P2453 ... .. come on that is not complicated make a couple of tests if you know what to touch and eliminates the two dtc that I have written 99% okay .. then if the car is not yours but a customer do from experienced people ...

[acidborn85]

hello, can someone tell me if it's ok with this file?
I loaded on the machine, warning light diesel particulate filter flashing, in diagnosis, there is just low oil, and light oil change on, pressure filter particle 0 hpa, and exhaust gas temperature bank 1 sens 1 900 degrees celsius, and also the sensor 2 900 degrees, loading of particulate filter 0%.


there and I have to say that I removed the temperature sensor and differential pressure.

you say that is normal?

[acidborn85]

the motor mount is this

[sportknight]

the fact with time a few years ago and it worked,of course, is not the state of the art, but still walking, and it's good