Autocom box gold...dead help!!!

[rts]

Good day to all ? for the case that happened to someone that the autocom after a "small" impact on the aluminium box is not working more???

...Or better, he turns on but does not recognize the interface, I do the test but does not recognize it give me error with the num of series


if ? gi? happened to someone can give me advice??? ....thanks

[Alessio93]

hi dov? that has had the impact ?

[rts]

on the edge of the box to about half...? dropped from a height of 40cm

[sportknight]

open it and check the welds

[tecnoracing]

but the pc recognizes the device in the device manager ?

[Alessio93]

you the pc pu? also recognize the perifarica but the software is not!!! open it to check the welds and see where he has had the impact if the bridge of the iron is giving problmi to the tab welded

[sa80libero]

but the body is ? deformed?
make sure to check the card, you may have broken...

[rts]

no, the body has not been damaged and the card ? cracked I tried to check the welds but nothing not a click is heard as the rel?....cabbage was a splinter had then oki

[sportknight]

scaldalo with a hair dryer or a hot air gun,I with my I fixed cos

[rts]

I followed the advice and thank you but nothing seems to me a assurdit? for one thing, so it has stopped....