editing control unit automatic gearbox, the lancia musa

[Alessio93]

hi guys practically I would have a problem on a lancia musa 1.3 multijet 90cv !!! year made a change to the exchange before it was automatic, but now the year is done manually, and I'm having problems to the light to check the exchange rate . I have disconnected the control unit of the automatic lights turn off but it turns on the abs . but know if you need to delete the pin on the ecu, or if you need to make some other change ? thanks to all

[Backgroop]

Hello the thing ? simple, you just need to insert a jumper wire between the can network bus, in practice, the ecus are connected in series with the body computer, centalina engine, ecu, transmission ,Abs wires of the can network are green and brown, you recognize them immediately since they are twinstati..

[Alessio93]

All fixed thanks for the help back. Thank you very much:d

[Backgroop]

All fixed thanks for the help back. Thank you very much:d

I figured it is always a pleasure..

[klajdin]

Sorry if I'm intruding but I don't understand how they are to be bridged, you have to put them in contact together ? Do not create errors in the Can network ?

[Backgroop]

Sorry if I'm intruding but I don't understand how they are to be bridged, you have to put them in contact together ? Do not create errors in the Can network ?

Not to be put in contact together like I said before, the units are in series and then the two wires enter and leave.. simple

[pesceautoservice]

how have you solved it? as he said back? explain to all what have you done!!! just to be clear.

[progresso]

sorry, and with the proxaggio of the can network as you put it? and reconfigured the body?