Scodifica total nevertheless 6jf

[Gia]

Can I scodificare the file with the driver 6f3 of the various software. In immo universal decoding is not the trovo. I can only find 6f3 and not 6jf

[egs]

Just on that plan c'? both 6F3 that 6JF...

[Gia]

I have version 3.2 and I can only find 6f3 and 6j3

[scinti]

I confirm that as fiat :6f3 and 6j3 as opel instead of partial 6jf. It is possible that it is a transcription error in the program? greetings

[Gia]

CAR SOFTWARE running on these ecu re-programming the e2p?

[Backgroop]

CAR SOFTWARE running on these ecu re-programming the e2p?

I have personally tested the car software on the marelli 6jf, and 6f3 with scodifica total and partial, it works fine, on the 70cv we must process the file BL 448kb, while on the 75 and 90 hp engine the file of the e2prom 95320

[Gia]

someone kindly check this scodifica total?

I have personally tested the car software on the marelli 6jf, and 6f3 with scodifica total and partial, it works fine, on the 70cv we must process the file BL 448kb, while on the 75 and 90 hp engine the file of the e2prom 95320

This I have in my hands ? a 70cv, and the driver of carsoftware d? well 70cv for the scodifica total through e2p.

Also, because if I pull out the flash from the file that is read in the bdm, I pull out a file from 452kb?

[Gia]

Someone can? help me? I tried the total through e2p via micro with immo universal decoding, and with car software. If I plug it in to the dealer for the diagnosis always tells me the STARTER is NOT ALLOWED

[cinqueturbo]

Put'n moment in the clear..
Car-CV-HW and what you want T o P..

Someone can? help me? I tried the total through e2p via micro with immo universal decoding, and with car software. If I plug it in to the dealer for the diagnosis always tells me the STARTER is NOT ALLOWED

Sorry but how do you think the partial will give you the consent to start the tour?
the total, perhaps, and I say "maybe",
but why? don't you try on the car?

This and Immo Partial..
I tell you already? you will have to encode the injectors,
press the clutch to change detection
Km are at 0,0
For the total mail HW and SW, and with what you have to write...

[Gia]

In the rar archive c'? the ori. cmq and idea 1.3 nevertheless, 70cv hw01c

I anyway, I tried always to the total.

use for now the bdm100 but I can also serial