Alfa 159 jts

[MALEDUK]

Good day to all the proplema of this 159 jts petrol acensione malfunction indicator light engine problem-jetronic intake degrees in the negative ? you can view the map to the advances of the phaser
thanks

[passione motori]

Hello, first try to operate the car as the original, and then you see the rest remap and other......

[MALEDUK]

the drive phase ? replaced the chain also but the problem persists only with the engine cold pitch? I would like to increase the range of the limit of the advance apirazione

[ugoboss]

usually it is the problem of the chain stretches, it is a known bug of these engines, you have to replace all the gears ,chain, and chain tensioner, if this was done can be that can be moved the gear onto the shaft and cams where the sensor can see the phase, and a gear that is felled the tree, and that if you try with a pin and a hammer to turn the plane moves by varying the phase, unfortunately, they are engines of derivation GM adapted from FIAT, Alfa Romeo, in a few words, a tavanata crazy.

[MALEDUK]

Thanks for the reply I try to do the work on the pin