inconsistency air mass/mass air flow sensor

[macinische90]

hello guys I have a lancia delta 2.0 mtj someone can help me?I have this error: an inconsistency air mass/mass air flow sensor what can be?

[blackwolf76]

I would check the egr and sleeves turbo...

[macinische90]

the pressure is ok and the egr cleaned and put back in his place... controlled by examiner's all ok....

I can upload images, mind you I did see the egr as it is taken

nn I want to mattere out of the way but I made a test.. sara stupid, but I thought I would disconnect the mass air flow sensor and try the machine... I lerrore but the car is better than when the mass air flow sensor is attached,mo 2 things.. or the mass air flow sensor is to be changed or the control unit and so forth by riconoscrmi a value of the air-1200,I don't believe it, but now I don't know what to think... I have a doubt on legr on sensoremap on the manifold.. I dunno...

Guys I'm going to sleep.. Anyway I 80 euro max to spend,I will explain to you I found a deb of pierburg to 80, or make a map with the egr off? Goodnight to all

2014060320255400.jpg this ? the diagnosis

2014052612565300.jpg and this ? the sensor

[Backgroop]

the pressure is ok and the egr cleaned and put back in his place... controlled by examiner's all ok....

I can upload images, mind you I did see the egr as it is taken

nn I want to mattere out of the way but I made a test.. sara stupid, but I thought I would disconnect the mass air flow sensor and try the machine... I lerrore but the car is better than when the mass air flow sensor is attached,mo 2 things.. or the mass air flow sensor is to be changed or the control unit and so forth by riconoscrmi a value of the air-1200,I don't believe it, but now I don't know what to think... I have a doubt on legr on sensoremap on the manifold.. I dunno...

Guys I'm going to sleep.. Anyway I 80 euro max to spend,I will explain to you I found a deb of pierburg to 80, or make a map with the egr off? Goodnight to all

2014060320255400.jpg this ? the diagnosis

2014052612565300.jpg and this ? the sensor

I invite you not to post messages in succession, otherwise it will be considered spam

[morisuper]

try to close the egr with a plate and see if it goes well the car , postami the file that you I close it I egr from the map

[macinische90]

Thanks, but for free?

[legendaryslave]

the mass of air to a minimum ? have you watched it ?

[macinische90]

Of course,air mass measured mass air objective are the same 321=321 I did not understand why CN deb attached to the machine part to 2700 if detachment of the connector from the car flies and part of the 1800s....

[beppe.c]

Of course,air mass measured mass air objective are the same 321=321 I did not understand why CN deb attached to the machine part to 2700 if detachment of the connector from the car flies and part of the 1800s....

see the max value of the air mass measured either clean or delete from the map egr and gates l error show if the value of the mass air ? higher.

[macinische90]

I do not understand.....