Page 1 of 2 12 LastUltima
Results 1 to 10 of 16
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    293

    skoda 2.0 tdi edc16u34 egr off is not good!!

    hello and welcome to the flavors!!
    guys or excluded from the egr on skoda 2.0tdi edc16u34 but it's not okay it works the same I do not understand!!I enclose ori and mod can someone tell me where am I wrong??thanks!!!http://www.professionalchiptuning.ne...1&d=1392142045
    File Allegati File Attachments

  2. #2
    THE AVERAGE USER L'avatar di chiptuning.cro
    Date Of Registration
    Nov 2013
    The resort
    Rovinj, Croatia
    Messages
    157
    go to address 1890BA and see a little...

  3. #3
    THE AVERAGE USER L'avatar di sno74
    Date Of Registration
    Jul 2012
    Messages
    641
    The map should always be made to flow all over me on a edc 16u31 I found the 3 different points.............

  4. #4
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    I'll give you a tip on these units, if you use ecm you'll see that it calls the map of the egr injection phase, you always have a look at how many there are in the list in the driver, if you have 2 as in this case, surely you will have 2 points with the bit to be reset to the egr-off, then, of course, is that you have to scroll across the map to safety.
    ugo ---- president A.E.P.

  5. #5
    THE ACTIVE USER (FO) (OF) L'avatar di legendaryslave
    Date Of Registration
    Dec 2012
    The resort
    RAIANO(AQ)
    Et
    44
    Messages
    1,985
    Citazione Originally Written by ugoboss Visualizza Messaggio
    I'll give you a tip on these units, if you use ecm you'll see that it calls the map of the egr injection phase, you always have a look at how many there are in the list in the driver, if you have 2 as in this case, surely you will have 2 points with the bit to be reset to the egr-off, then, of course, is that you have to scroll across the map to safety.
    quoto in full there? who says the friend ugoboss

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    293
    thanks guys for the answers... actually there are two of them one to address 1890ba as suggested by chiptuning and one to address 1890c4 that or mod I,then in practice so you're telling me that I either need to mod the two of them right? or do you understand??

  7. #7
    THE AVERAGE USER L'avatar di chiptuning.cro
    Date Of Registration
    Nov 2013
    The resort
    Rovinj, Croatia
    Messages
    157
    yeah, that's right...

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    184
    Hi,I do diversamente.Posto the 2 files (file ori and your,and then use it directly mod file.)and also the photos.
    Immagini Allegate Attached Images
    File Allegati File Attachments

  9. #9
    THE ACTIVE USER L'avatar di ugoboss
    Date Of Registration
    Sep 2013
    The resort
    FRARA
    Messages
    1,825
    Citazione Originally Written by neo Visualizza Messaggio
    Hi,I do diversamente.Posto the 2 files (file ori and your,and then use it directly mod file.)and also the photos.
    your closing goes well neo, but you also have closed only a part, and for accuracy other than alfetta80.
    ugo ---- president A.E.P.

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    293
    ok all clear!!!!!!!!then I prepare the file and as soon as possible write it and I want to know how it went!!!thanks to all!!!!!!!!!!!!!!!!!

    boys little doubt it is normal for the first panettone and different on the other???the rest are the same!!
    Last edited by leandro89; 12-02-2014 to 21:31

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •