peugeot 806 2.0 diesel immo off?

[raffaell0]

Hi to all.A friend of mine has lost the only key he had.Now, the machine ? stop. I have the possibility to disable the immobilizer, reading eeprom? The car is located far away, then I can do anything on the spot.What do you advise me to do? A key c ? the to put on the bike if I can manage the immobilizer.
Thanks

[legendaryslave]

You can? do flash only and not c'? soft that takes us only manually that I know of

[raffaell0]

excuse the ignorance, but if flash can I use the rooster or nn c?? do I do so?. I have to dissaldarla? Since ? a BOSCH EDC15C2, can you? do the scodifica with short, as the ecu siemens Fenix5?

[legendaryslave]

excuse the ignorance, but if flash can I use the rooster or nn c?? do I do so?. I have to dissaldarla? Since ? a BOSCH EDC15C2, can you? do the scodifica with short, as the ecu siemens Fenix5?

no no other that fenix but with the cock you could achieve that with reading the obd before unsolder try to read

[raffaell0]

Thanks. Can I use an emulator? You know? if nn is much a emulator I find it very good, 1? x, on the basis that st? reading, nn turn on the lights errors. 2? you work less and you do not risk + of the time.

[motorsport]

if you want to be on the safe side without too many tests to go with "emulator"

[mecdoc]

read the flash
we give you a hand

[raffaell0]

*motorsport, then you can? put the emulator? I haven't seen any around x this ecu, that's why? nn I knew if it could be done.
See how much a emulator, if ? little thing ok, otherwise I have to see if I read it. The fact ? that I don't have the machine to hand to try. I sent the ecu and then I have to fight with their eyes closed. Anyway if someone s me? to say that price is a an emulator for this ecu? For the fenix5 by 10/15€ I have seen. We x this. Then I noticed that the same ecu, it exists in 3 models, am I right? 2-you must to read the flash and eeprom nn I remember the acronym. But can you confirm?

[motorsport]

*motorsport, then you can? put the emulator? I haven't seen any around x this ecu, that's why? nn I knew if it could be done.
See how much a emulator, if ? little thing ok, otherwise I have to see if I read it. The fact ? that I don't have the machine to hand to try. I sent the ecu and then I have to fight with their eyes closed. Anyway if someone s me? to say that price is a an emulator for this ecu? For the fenix5 by 10/15? I have seen it. We x this. Then I noticed that the same ecu, it exists in 3 models, am I right? 2-you must to read the flash and eeprom nn I remember the acronym. But can you confirm?

there is there is there is universal emulator for peugeot edc15c2...rightly, I can't post the link,runs on the web, you'll find him for sure!!

[legendaryslave]

you can also do from the flasks do not need to force the emulator