Page 1 of 3 123 LastUltima
Results 1 to 10 of 28

Discussion: Smart 700 stuck!!

  1. #1
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    Pescara Abruzzo
    Messages
    239

    Smart 700 stuck!!

    Hi guys, I will tell you in short:
    Car written via obd with gallo v2.
    I do a first test totally changing if (downloaded from the net)
    And the CAR part.
    I decide then to rewrite the file ori (always downloaded)
    And in spite of a written 100% the CAR will not start.
    Rewrite the ori desolder the memory but still no go.
    It never happened to anyone else?
    And perhaps it is corrupted e2p?
    Thanks in advance

  2. #2
    Administrator L'avatar di msport (exil77grande)
    Date Of Registration
    Jun 2012
    The resort
    Chiplandia
    Messages
    4,817
    these machines are often very strange,alientech, for example, provides file called mix,often if you do not read and write to the file ori of the car you have always problems of the failure of turbo pressure.
    [IMG]http://bannerbreak*****/banners/3/563/135700419269659378.gif[/IMG]

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    Messages
    251
    but the original that you have not rewritten ? that of the car, but is downloaded from the network, if I understand it, in this case try to rewrite the map ? the game, in some cases, if I remember correctly, pu? alter the eeprom and some tools recommended to do a backup of the same before proceeding to the writing of the flash.

  4. #4
    THE AVERAGE USER L'avatar di giuseppe1374
    Date Of Registration
    Feb 2013
    The resort
    Sicily Catania
    Messages
    408
    you have corrupted the e2p, read it, and put it, let us help you, however you may need an alignment.

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    Pescara Abruzzo
    Messages
    239
    Ok for the e2p.
    I forgot to say that the workshop where I am doing the work authorized Smart and with a diagnosis official
    After the block (I speak of the time when it does not ? pi? the game) can not pi? to enter the diagnosis .
    The diagnosis does not see the engine control unit cos? as the rooster v2.
    Pi? late poster? the serial.
    Thank you all in advance

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    The resort
    Prov. of Power
    Messages
    483
    try to riverginare the eeprom and write to the original file in the flash programmer should restart

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    Pescara Abruzzo
    Messages
    239
    I need a e2p not corrupted.
    I said a friend to? the e2p "travels" with its original file.
    If someone has already? a e2p virgin and the flash head gives me a big pleasure!!

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Aug 2012
    The resort
    Prov. of Power
    Messages
    483
    you may not use the e2prom from another car why? the key codes of the transponders are different

  9. #9
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    Pescara Abruzzo
    Messages
    239
    I have to say that CAR ?' in the authorized workshop that has the diagnosis official.
    At present, the problem is that the ecu is not seen even from the time of diagnosis

  10. #10
    THE ACTIVE USER L'avatar di carlo abarth
    Date Of Registration
    Nov 2012
    The resort
    VESUVIUS
    Messages
    1,521
    mauro kiesto but they don't leave me my friends!!!
    What is a hare? A rabbit Abarth

Page 1 of 3 123 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •