Hello all ,
I have a problem with my alfa 166 2.4 jtd . the code ? in the block, and I would like to proceed with a scodifica ,but I wanted to first know technically what it is,before to bring her to the electricians.
Hello all ,
I have a problem with my alfa 166 2.4 jtd . the code ? in the block, and I would like to proceed with a scodifica ,but I wanted to first know technically what it is,before to bring her to the electricians.
if you need to make a scodifica put the data of the ecu not the cubic capacity of the vehicle then you see what you can do....
ok to proceed?
the model of the ecu from scodificare ? Bosch 0 281 001 787 original alfa ,I had a rush of attention and ? entered in the block, the "code"
Last edited by msport (exil77grande); 26-09-2013 at 19:32
Surely it will be? a control module 5 connectors...if ? cos?, the scodifica is only with the emulator code Euro 2/3...
have you tried to unplug the ecu code for half an hour, sometimes those are unlocked by doing so.Originally Written by nico87trip
I confirm edc 15c8 you have to do a partial and then put a emulator to delete the code to this ecu....
I found on the web ecu key collar and code to 250 euros,according to you? scodifica or change everything?
if you have a bit of expertise, you should scodificare, you spend less and you remain his keys.
A minimum of manualit? the I but are willing to learn...the main problem ? the kws 2000 plus does not find the ecu so I don't even have a reading where to start?
for this you have to open and unsolder the e2prom, make a scodifica partial with a soft special, and then mount an emulator inside the ecu, which is located in many on-line stores.
Quote
