minimal loop

[munro]

According to you guys ? feasible such a thing on a edc15c7, for example,.....
l? s? that ? a rather unusual thing but they asked me if you can? do....if you where you should intervene????
I attach a video to understand the desired effect...http://www.youtube*****/watch?v=MkKiP1A_Gvk

[faberecu]

a bang on diesel :P
delay injection in order to turn on the mixture and create a little work and inject diesel fuel to run the turbine, a strong
move the axes to the many tests , switch on the pedal .... tests if I have understood well , maybe with a turbo big variable geometry

[munro]

not ? a bang...but rather a "subsequent"....
in the map of the minimum of the edc15c7, for example, you could do something??

[faberecu]

on the Escot and Sierra cw, you put the pin 42 to ground with a switch , and it almost abilitava the ecu to the reading of the eprom+great on a different address
where the position and the release pedal delayed l ignition and opened the Vae modified by injecting gasoline , the result of 0.5 bar of pressure from a standstill , with a shot on the exhaust tube and the lag is non-existent with flanges

[munro]

if you noticed in the video the pick-up part with a minimum of regular, but then as if something intervenes to make it "looppare"

[munro]

*faberecu not ? a bang but a "dancer"

[faberecu]

what's it for ? just to make smoke?

[munro]

the smoke in that case, you see, because the half-sara heavily mapped.....