hi guys I would like to know if and success already someone on the bdm clone not to read the ecu because the flat was originally mounted on the contrary, and how you solved it,,percheintenzionato to buy one from the shop of the forum, and I would not want to run into that situation thanks to all
the flat ? a normal cable, just change it. however, that of the forum ? ok as bdm
[COLOR="#0000FF"][CENTER][B]In life you never stop learning![/B][/CENTER][/COLOR]
[CENTER][COLOR="#FF0000"][B]I do Not answer to private messages with requests for help! If you need a hand, ASK ON the FORUM!!![/B][/COLOR][/CENTER]
as he says of the magi, entrusted to the shop of the forum, test all the products before sales.
[COLOR="#FF0000"]There is a driving force stronger than steam, electricity and atomic energy: the will[/COLOR].
[COLOR="#FF0000"]personal Opinions, for educational purposes only.[/COLOR]
thanks guys I had this info and I wanted to understand where was the problem
Wax a serious BDM with cables to the contrary when I had purchased.... .Luckily mine was correct
I checked the pins with the tester before using it..
I had the flat to the contrary, and luckily I realized.....I rewired the plug.
Write permission
Quote