Results 1 to 8 of 8
  1. #1
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    277

    Problem yaris petrol ...

    Hi all, I have a problem on this car, the engine turns over but does not reach the current to the spark plugs... Sensor phase replaced and bobbine ne port 1 x each cylinder... To you and happened to you? Thank you in advance

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    The resort
    salerno
    Messages
    351
    hello diagnosis what do you by'

  3. #3
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    from what nato and the problem from a bit of info , that nn is supplying voltage to the spark plugs, and general information.

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    The resort
    Arezzo - Florence
    Messages
    961
    I have heard that the yaris there is a French version and a japanese, the latter if he has a problem with the cylinder, and all of us? regarding it, cut the power to all.

  5. #5
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    277
    Diagnosis no error code... What did you mean problem to the cylinder? The bobbine have been replaced all 4 including the phase sensor...but the car does not want to know

    Even if it doesn't go any injector????
    Last edited by msport (exil77grande); 13-05-2013 at 21:49

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    The resort
    Arezzo - Florence
    Messages
    961
    sincerely the info on the pi? accurate not I, but if next Saturday you have not yet resolved, I ask everything that I can to those who had spoken to me of this thing...

  7. #7
    THE AVERAGE USER
    Date Of Registration
    Dec 2012
    Et
    58
    Messages
    221
    sorry, but if you try to insist, at least, feel the smell of unburned gasoline ? if current does not reach even to the injectors could also be the maf to fail ( one of the few cars that should not be in motion if the mass air flow sensor fails )

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jan 2013
    Messages
    113
    we would have to understand that material conveyor belt and then the year and any dtc in the ecm ,if it does not reach the current to the spark plugs and saw that the coils were replaced, and see if there is a negative and a positive signal on the reels possibly the signal with the oscilloscope

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •