addresses, maps discovery td5

[magi1984]

I enclose a file ori and id beds with gallo2 on a discovery II 2.5 td5 with ecu motorola mems, the cock on this ecu only reads the maps part, in fact, the file ? tiny.
Monday the law? with kess original for safety, but the problem ? always the same, I know how to indicate which maps change?

I have found these maps, but for definerle all I need your help:

00d02: ???
00df2: ???
00ed0: map pedal????
00f8e: map pedal????
0101c: injection time ?
012a0: injection time ?
01828 and 01874: torque limiters
01ff2: turbo pressure
from 02374 there are 4 maps in the same way that I do not know what they are
02e80:????
033c0: it seems a map of the rail pressure but I'm not sure

[msport (exil77grande)]

0101c the imitator fumes
02374 injection zoned
Add

01284 limiters fumes
0281e injection zoned
02690 Injection parzializato
02502 injection zoned

[Def89]

I see you are not the only one to have struggled with this control unit,
I hope not to pollute this thread and add some information:
1) the addresses of ALL the tables that are contained in a
the table is located at the address 0x1CEFE of the entire file, 256kb, or
to address 0x03EEE file 16kb, which is located in the final part of the
file 256k, pi? precisely this is the file of 16kb starts at address
0x019010 file is 256kb, and I think this is what most of the
programmers download from this unit, I'm not sure to? why? I
use a tool to spread only among the owners-users of this
engine is called nanocom, or to read the entire file using a
programmer generic GQ-4x...
the organization of the table ? bottom first, in practice, the first word
read ? the second part of the entire doubleword address, of course
the second word read ? in the first part.

2) but I think you know already?, at the address indicated by table 1
there are 2 word indicating the number of columns and rows of the
table, then there are many words as there are many columns and
as many as the rows, after which? c'? the table itself.

the addresses of the tables vary depending on the version of the firmware that
turn on the controller, defender or discovery, several years and other things, for?
remain constant the indci positional table 1, in
practice, if the first dword contains the address of the first value from table
of the address change by changing the version of the firmware, but his position
in the table in point 1 remains constant.

My problem ? understand what are the tables, some I understand, but not
I am an expert in tuning, and I don't know how to interpret the values of the rows and
columns, as well as? the values within the tables themselves.....

this link c'? the program written by a friend to handle these maps, some are "decoded" no, the file ? able to open the program ? what you can extrapolate from the memory of the control unit for middle of the instrument nanocom (I attach a file standard for land rover discovery td5 post 2002, the format ? .map)




Greeting